Roland ProAV V-800HD MK2 HDMI Multi-Format Video Switcher

• 16 inputs, 10 Cross points
• (4 SDI/Composite/RGB + 4 DVI-I/HDMI)
• 6 outputs (2 SDI + 2 DVI + RGB + Composite) Simultaneous output
• Dedicated multi-view monitor output
• High quality 4:4:4/10 bit processing
• 1080p/i, WUXGA processing
• 1 M/E (KEY, PinP) + AUX or DSK
• Frame Sync & Scaler on all inputs and outputs
• 3G, HD, SD 3-mode SDI
• (3G-SDI Level A/B compatible)
• DVI-D/RGB/HDMI compatible
• Input signal status confirmation LEDs
• HDCP Compatible
• Two active still images from sixteen still memories
• Ten assignable cross points
• AUX bus switch

LIVE EVENT PRODUCTION

Supporting live events requires being ready for an ever-changing variety of input sources. The V-800HD MK II is equipped with scaling for every input and a wide range of common video connectors allowing camera, data and smart device sources of different resolutions and frame rates to be automatically detected, scaled and then adjusted as needed. Fine position adjustment for each input can be set in real-time using the joystick positioner control or from the menu displayed on the multi-viewer.

LECTURES, MEETINGS AND PRESENTATIONS

The V-800HD MK II’s 4:4:4/10 bit processing ensures pixel accurate color making it the ideal switcher for large screens over 300 inches and ensures the crisp detail of hi-resolution data sources are sharply output to today’s low dot pitch LED displays. The new AUX bus selection layer makes it easier than ever to send a source to a second output destination such as a confidence monitor, presenter notes display, second display or overflow rooms.

HALL, THEATER, CHURCH

The V-800HD MK II is also a powerful solution for installation in facilities that have both professional and in-experienced operators. Complex settings can be recalled with a one-touch memory recall and a straight forward interface makes it easy to step-up and operate without training. Two still images are assignable to the cross points from a choice of 16 internal stored images. This is useful for displaying corporate or institution logos and safety slides. The V-800HD MK II also makes it easy to create up to 3 “angles” from a single camera source with the high-resolution scaling of the multi-zoom function.

WEBCAST SWITCHING

Modern webcasts require a variety of camera and computer sources of a variety of formats. The V-800HDMKII simultaneously supports video resolutions of 1080i, 1080p, 720p, 480i/p and computer data resolutions of up to WUXGA allowing for high quality webcast requirements. The built-in PnP and Key Compositing features are ideal for creating informative training instruction and news webcasts.

STELLAR IMAGE QUALITY AT 1080P (3G-SDI)

Supports 1080p video signals at bit rates as high as 3 Gbps — twice the rate of conventional HD. Asserts all the vividness of high-realism, high-detail camera and computer sources.

TRUE MULTI-FORMAT PERFORMANCE

There's no need to convert the input source to match the video output format. The built-in scalers up-convert and down-convert any video source to the optimal resolution.

FULL RANGE OF CONNECTIVITY

The V-800HD MK II supports a large number of input formats, from analog to digital, with all the necessary connectors. The SDI connectors accommodate 3G, HD, and SD. The DVI-I connectors pull full duty for DVI-D, DVI-A and even HDMI using a simple HDMI/DVI adapter. The Mini D-Sub 15 pin type connector accommodates SD/HD component as well as computer input via RGB.

EQUIPPED WITH AUX BUS SWITCH

Easily switch sources connected to the assignable AUX outputs with the dedicated AUX layer switches. This is ideal for selecting which source is sent to a confidence monitor or secondary destination.

4:4:4/10-BIT INTERNAL PROCESSING

The V-800HD MK II uses 4:4:4/10-bit internal signal processing. This lets you achieve compositing and output with no reduction in high-detail RGB signals driven from a computer. The result is a sharp, unblurred display of video and text, even on large screens and LED displays. The V-800HD MK II delivers high image quality for all uses, from live broadcasts to event displays.

MULTIVIEWER OUTPUT FOR SOURCE MONITORING

The V-800HD MK2 features an 18-channel audio mixer which includes four XLR/TRS Combo jacks with 48v phantom power, RCA stereo Pair, plus audio de-embed from the six video inputs. A built-in effects library added from Ver 2.5 is packed with presets for common production scenarios including interviews, ambient sound recording, and eliminated wind noise when recording at field. Anyone can easily set up without audio knowledge.

• * Use an HDMI monitor that supports HDCP and 60p signals.
• * SDI and composite inputs are displayed at the original source frame rate.
• DVI-I/HDMI and RGB/Component inputs are displayed using a reduced frame rate.
• * Changing the channel cross-point assignments changes the order of displayed sources.
• * Still images imported from USB memory are not displayed on the source monitor.

BUILT-IN HDCP MODE

When playing back a Blu-ray disc that contains commercial content or digital broadcast programming, the digital output is encoded using HDCP (High- bandwidth Digital Content Protection), which is one means of copyright protection. This means that switchers that are not HDCP-compatible will not display or pass-through such video content, even in cases where permission for use in a live event was obtained from the copyright holder. To resolve this problem, the V-800HD MK II features a dedicated mode that officially supports HDCP. A panel indicator lets you check the operating state when the unit is in the HDCP mode.

• * In HDCP mode, no video signals are output from the analog or SDI connectors.
• * The display or projector connected to a digital output must be HDCP-compatible as well.

1) Scalers You Can Use Any Way You Like

The V-800HD MK II features scalers that let you make settings independently for every input source. With these, you can take input sources of different resolutions and adjust to any sizing and resolution including odd-sized LED walls. You can freely scale digital, analog RGB, and component sources.

2) A Full Range of Keyers

In addition to the newly designed Picture-in-Picture (PinP), Luminance Key, Chroma Key, and DSK for 4:4:4/10-bit input, you can also use an External Key. * DSK cannot be used during External Key operations. (* DSK cannot be used during External Key operations.)

3) AUX BUS

The V-800HD MK II features scalers that let you make settings independently for every input source. With these, you can take input sources of different resolutions and adjust to any sizing and resolution including odd-sized LED walls. You can freely scale digital, analog RGB, and component sources.

4) USB Port for Importing Still Images

The V-800HD MK II can store up to 16 still images imported from a USB memory device.

5) Memory Banks Supporting Worry-free Configuration Recall

The V-800HD MK II features scalers that let you make settings independently for every input source. With these, you can take input sources of different resolutions and adjust to any sizing and resolution including odd-sized LED walls. You can freely scale digital, analog RGB, and component sources.

6) Assignable Cross-points For the Layout You Want

You can assign video sources to cross-points in any order you like instead of having to use the numerical order of the connectors on the rear panel. This lets you reorder and shift video feeds when sudden changes in camera lines or differences in format create blanks between cross-points. (* Removable magnetic label template displaying the factory-default state is included.)

7) Carefully Selected Transition Patterns

The simple design makes selecting a transition pattern as easy as pressing an icon-marked button. You can also set the length of transition times precisely, using either seconds or frames.

1 DVI-I/HDMI Input

A slider switch selects either DVI-D or DVI-A. Support for HDMI is also possible through use of a simple HDMI/DVI adapter. Supports HDCP input.

2 COMPOSITE Input

The V-800HD MK II lets you use four analog composite inputs.

3 RGB/COMPONENT Input

Using a conversion cable lets you input analog component signals in addition to VGA type output from a computer.

4 SDI Input

The V-800HD MK II supports three formats o digital video signals: 3G, HD, and SD.

5 RGB/COMPONENT Output

The V-800HD MK II can accommodate projectors and other video devices that accept only analog input. What's ore, the built-in scalers let you specify resolutions that differ from the main output resolution.

6 SD Output

This provides a cons ant down-scaled composite signal regardless of the main output resolution.

7 Multiviewer Output

Monitor your active input sources along with Program and Preview.

8 DVI-D/HDMI Output

The V-800HD MK II is equipped with two DVI-D/HDMI outputs for connecting displays/projectors and is HDCP-compatible.

9 SDI Output

Two SDI outputs are provided supporting 3G, HD, and SD signals.

MULTI-ZOOM

Using the shared input function, you can assign the video on channel 1 to channels 2 through 4 and the video on channel 5 to channels 6 through 8. The scaler for each input can zoom into any position in the video image enabling a virtual multi-camera environment. This gives the appearance that you have additional cameras connected.

MIDI CONTROL

You can use MIDI to interlink the V-800HD MK II with other products including the Roland V-Mixing system and even another V-800HD MK II.

Connect the V-800HD MK II to a V-Mixer console to achieve a true "audio follows video" solution. When you take a video source live, you can have the audio level instantly recalled.

Operating two V-800HD MK II units in tandem makes it possible to perform switching for 3D video split into two left and right video signals.