Shure IntelliMix® P300 Audio Conferencing Processor

Shure IntelliMix® P300 Audio Conferencing Processor with 10 Dante Inputs/Outputs

Don’t let echo, noise or distortion take over the meeting. The IntelliMix® P300 enhances every aspect of conference audio. Combined with Microflex® Advance™ or Microflex® Wireless microphones, clean, clear sound reproduction and intelligent mixing keeps the agenda on track with clear communication.

HOW IT WORKS

Streamline the audio experience for every discussion. Fixed architecture provides simple setup, requiring less DSP programming and commissioning time. Multiple connectivity options allow for seamless integration with Shure conferencing microphones, laptops and even mobile devices. Easy, rackless mounting enables quick, compact integration behind a display, under a table, or in a credenza. The IntelliMix P300 makes sound smarter, faster.

WHY IT’S BETTER

Audio enhanced

Echo cancellation. Noise reduction. Automatic mixing. Automatic gain control. Your conference is only as good as your audio.

Clever Operation

Intuitive, programming-free LED mute sync functionality with leading third-party software codecs including Zoom Rooms, Microsoft Teams and Skype for Business.

Scale Up

Easily add a presenter mic or control additional zoned loudspeakers with onboard matrix mixing for sound reinforcement applications.

Connect with Confidence

Driverless USB audio connection to PCs for soft codecs. Analog I/O for hard codecs. 3.5 mm connection to mobile phones to bridge a remote caller. Design projects offline with Designer System Configuration Software for simple project management. Seamlessly compatible with Microflex Advance and Microflex Wireless conferencing microphones for a complete Shure ecosystem.

Meet In Confidence

Shure Audio Encryption utilizes AES-256 technology to protect confidential content.

QUALITY THAT’S IN THE DETAILS

Specifications of Shure IntelliMix® P300 Audio Conferencing Processor

• Input: (2) 3-pin block connector (Active Balanced)
• Output: (2) 3-pin block connector (Impedance Balanced)
• Mobile: (1) TRRS 3.5 mm (1/8")
• USB Connections: (1) USB 2.0, Type B | Single port carries 2 input and 2 output channels (Summed mono)
• Network Connections (Dante Digital Audio): (1) RJ45 | 10 Dante Inputs , 8 Dante Outputs
• Polarity: Non-inverting, any input to any output
• Power Requirements: 802.3 at Type 2 (PoE Plus), Class 4
• Power Consumption: 17.5 W, maximum
• Weight: 1710 g (3.8 lbs)
• Dimensions (HxWxD): 4 x 21 x 22.6 cm (1.6 x 8.3 x 8.9 in.)
• Control Software: Shure Designer
• Operating Temperature Range: −6.7°C (20°F) to 50°C (122°F)
• Storage Temperature Range: −29°C (-20°F) to 74°C (165°F)
• Thermal Power Dissipation: Maximum 17.5 W (60 BTU/hr) | typical 14.6 W (50 BTU/hr)
• Audio Frequency Response: +1, -1.5 dB | 20 to 20,000 Hz
• Dante Digital Audio Sampling Rate: 48 kHz
• Dante Digital Audio Bit Depth: 24
• USB Audio Sampling Rate: 48 kHz
• USB Audio Bit Depth: 16, 24

Latency (Does not include Dante latency)

• Firmware 4.1 and newer: Dante 1-8 in to Dante out (AEC enabled) 15.4 ms | Dante 1-8 in to Dante out (AEC disabled) 8.7 ms | Dante 9-10 in to Dante out 3.4 ms | Analog in to Analog out 3.8 ms
• Firmware 3.1 and older: Dante 1-8 in to Dante out (AEC enabled) 12.5 ms | Dante 1-8 in to Dante out (AEC disabled) 5.8 ms | Dante 9-10 in to Dante out 1.8 ms | Analog in to Analog out 2.2 ms
• Analog Connections (Block Connectors) Dynamic Range: 20 Hz to 20 kHz, A-weighted, typical
• Analog Connections Analog-to-Dante: 113 dB
• Analog Connections Dante-to-Analog: 117 dB
• Equivalent Input Noise: 20 Hz to 20 kHz, A-weighted, input terminated with 150Ω
• Line: -86 dBV
• Aux: -98 dBV
• Total Harmonic Distortion: @ 1 kHz, 0 dBV Input, 0 dB analog gain | <0.05%
• Common Mode Rejection Ratio: 150Ω balanced source @ 1 kHz | >50 dB
• Input Impedance: 9.6 kΩ
• Input Clipping Level: Line +27 dBV | Aux +15 dBV
• Output Impedance: 80 Ω
• Output Clipping Level: Line +20 dBV | Aux +0 dBV | Mic -26 dBV
• Mobile Connection Pin Assignments: Tip Audio Input (Left) | Ring 1 Audio Input (Right ) | Ring 2 Ground | Sleeve Audio Output (To Phone)
• Dynamic Range: 20 Hz to 20 kHz, A-weighted, typical | Analog-to-Dante 99 dB | Dante-to-Analog 90 dB
• Equivalent Input Noise: 20 Hz to 20 kHz, A-weighted, input terminated with 20Ω | -95 dBV
• Total Harmonic Distortion: @ 1 kHz, 0 dBV Input, 0 dB analog gain | <0.05%
• Input Impedance: 3.7 kΩ
• Input Clipping Level: +4 dBV
• Output Impedance: 1.4 kΩ
• Output Clipping Level: Output terminated with 2.2 kΩ | -20 dBV
• Networking Cable Requirements: Cat 5e or higher (shielded cable recommended)