Screen International Screen Winch System for Major Screens up to 450cm width - SCREENWINCH450

Screen International Screen Winch System - For Major Electric Screens up to 450cm width ONLY - SCREENWINCH450

This SCREEN WINCH SYSTEM is a particular lift that enables you to lower a Major electric screen up to 450 cm. of width a distance of 7 mt.. The Screen Winch is supplied with a manual switch but can be also ordered with an external multichannel RF remote control. It is supplied with six brackets: three for fixing the winch to the ceiling and three for mounting the screen to the beam. A cable coiler, to be fixed to the ceiling behind the screen winch, is included; its purpose is to supply power to the electrical projection screen. A SAFETY DEVICE is built-in in order to offer maximum security in case of any failure of the mechanism.

Technical Specifications:

• Motor Power: 50 Nm
• Motor Speed: 11 rpm
• Motor Power supply: 230V / 50 Hz
• Motor Consumption: 255 W
• Motor Certification: IMQ
• Roll down speed of Screen Winch System: 19 sec./metre
• Two strong steel cables diameter: 3 mm.
• Breaking test load: 350 kg. for each cable
• Screen Winch housing dimensions: 2060 x 200 x 170 mm. (WxDxH)
• Beam dimensions: 45 x 90 mm. (DxH) – Length of the beam is approximately the same of the length of the projection screen housing
• Net weight of the Screen Winch System: 40 kg
• Maximum load that can be hung to the beam: 36 kg
• Screen Winch System plus screen housing in closed position: minimum height 52 cm.
• Safety device and cable coiler included
• Screen Winch can be only be mounted to MAJOR screens up to 450 cm. of width.