Screen International Screen Winch System for Compact Screens up to 250cm width - SCREENWINCH250

Screen International Screen Winch System - For Compact Electric Screens up to 250cm width ONLY - SCREENWINCH250

This SCREEN WINCH SYSTEM has been developed to obtain smaller overall dimensions of the system for motorized screens up to 250 cm. of width. The maximum stroke of the Screen Winch System will be 7 mt. Screen Winch is supplied with a manual switch but can be also ordered with a multichannel external RF remote control. It is supplied with three brackets for fixing the winch to the ceiling and a cable coiler, to be positioned to the ceiling behind the screen winch. Its purpose is to supply power to the electrical projection screen. Moreover, a SAFETY DEVICE is built-in in order to offer maximum security in case of any failure of the mechanism.

Technical Specifications:

• Motor Power: 50 Nm
• Motor Speed: 11 rpm
• Motor Power supply: 230V / 50 Hz
• Motor Consumption: 255 W
• Motor Certification: IMQ
• Roll down speed of Screen Winch System: 19 sec./metre
• Two strong steel cables diameter: 3 mm.
• Breaking test load: 350 kg. for each cable
• Screen Winch housing dimensions: 2060 x 200 x 170 mm. (WxDxH)
• Net weight of the Screen Winch System: 30 kg
• Maximum load that can be hung to the winch: 36 kg
• Screen Winch System plus screen housing in closed position: minimum height 35 cm.
• Safety device and cable coiler included
• Screen Winch can be only be mounted to one of the following screens: COMPACT, ELLIPSE, E-LITE up to 250 cm. of width.