WyreStorm EX-40-G3 UTP Extender Set with 40m Range

WyreStorm EX-40-G3 UTP Extender Set with 40m Range with Power over Cable abilities

WyreStorm's EX-40-G3 with the low-profile point-to-point EX-40-G3 extender set, it’s never been easier to extend full 1080p HD video over a Cat6 cable; HD audio is also supported. Plus, IR source control and PoC (Power-over-Cable) all wrapped up in a compact chassis for unbeatable value, reliability and ease of installation.

Discreet, Smaller Footprint

WyreStorm’s newly designed 40 meter extender, the EX-40-G3, is now smaller than ever. With almost half the width of its predecessor, this makes the G3 lighter in weight and easier to keep discreet.

POC Ready

Size isn’t the only upgrade found in the newly designed 40 meter extender. The G3 now includes Power over Cable abilities, saving the installer time and headache from having to supply local power discreetly to the receiver. But don’t fret if PoC isn’t available, as the receiver is capable of accepting local power.

Feature Rich: Unbeatable Value

With features such as PoC, automatic EDID, long cable mode capability and IR source control, the EX-40-G3 brings a tremendous amount of features to any simple installation at a cost effective price.

HDCP Compliant

WyreStorm extender solutions play nice with the equipment they’re connected to, ensuring that the HDCP encryption is maintained throughout the process.

Technical Specifications

Inputs

• TRANSMITTER: 1x HDMI 19-pin type A
• RECEIVER: 1x UTP 8-pin RJ-45 female

Outputs

• TRANSMITTER: 1x UTP 8-pin RJ-45 female
• RECEIVER: 1x HDMI 19-pin type A
• Output Video Encoding: TMDS over UTP
• Encoding Data Rate: 6.75Gb/s
• Audio Formats: 2ch PCM
• Video Resolutions (max): 1920x1080p @60Hz 8bit
• Supported Standards: DCI
• Maximum Pixel Clock: 225MHz

Communication & Control

• HDMI: HDMI 1.3b | HDCP 1.4 | EDID | DVI/D supported with adapter (not included)
• UTP: HDMI | HDCP 1.4 | EDID | IR RX-TX | 1-way PoC Transmitter to Receiver
• IR: Transmitter: 1x IR TX: 3.5mm (1/8in) TRS Mono | Receiver: 1x IR RX: 3.5mm (1/8in) TRS Stereo

Power

• Power Supply: 5V DC 1A (Optional for Receiver)
• PoC: 1-way Transmitter to Receiver
• Max Power Consumption: 2.5W (TX/RX Pair)