Vision SB-1900P 100W Active SoundBar with Mounting Strips

Vision SB-1900P 2 x 50 Watt RMS (50 Watt) Active SoundBar with Mounting Strips for below Flat-Panels

Need to punch a hole in the back wall? The SB-1900P soundbar outputs truly impressive sound! The chassis has a matt black finish that enhances any audio-visual installation in meeting rooms, boardrooms, and conference rooms.

Rename Bluetooth

Set any Bluetooth name and Pin. Use PC software to load an image file onto a USB stick. Insert into the soundbar and boot up. The advanced BT chipset allows multiple devices to pair at once.

ARC HDMI

If a display is connected to the ARC input on the soundbar, the display remote control will control the soundbar volume.

RS-232 Control

For professional integration it features RS-232 control via the USB port.

Hanging Brackets

A set of brackets are included which hang the soundbar under the flat panel. The speaker also comes with rubber feet if you need to place on a shelf, and wall-hanging lugs.

Multiple HDMI

Two HDMI inputs and an HDMI output make connecting to other devices easy.

Analogue Input

A stereo line-level Minijack input handles normal analogue sources.

Auto Standby

Choose to use the standard auto standby setting to conserve power, or hold down VOL+ to disable auto-standby.

Power Cycling

If mains power is turned off and on, the SB-1900P will automatically come back on resuming the previous settings.

Remote Control

A remote control is included.

Specifications of Vision SB-1900P Active Soundbar

• Amplifier Output: 2 x 50w watts (RMS)
• Audio Drivers: 4
• Input 1: Aux in (3.5mm) Input Sensitivity: 500mV
• Input 2: HDMI(2 in 1 out)
• USB-A: for renaming Bluetooth and RS-232 control
• Speaker Impedance: 8 ohms
• Sensitivity: 91 dB (1w/1m)
• Frequency Response: 70Hz-20kHz
• Power Consumption: 30w (< 0.5W standby)
• Bluetooth: V4.2
• Maximum Power Transmitted: 5 dBm
• Accessories Included: 1 x Remote Control, 2 x L shaped universal mounting strips – to hang soundbar beneath flat panel, 1 x USB-A to 9-pin serial adaptor cable, 4 x 1.5 m (4.9ft) Figure-8 power cable (right-angle plug: UK/EU/US, normal plug: AU)
• Colour: Black
• Construction Material: ABS Plastic
• Power Input: DC 20V/3A
• Power Supply: External 100-240v 50/60Hz AC Power Supply – 21 volt / 3 amp. DC tail length: 1.2 m (3.9ft). Transformer dimensions: 128.9 x 51.3 x 34.8 mm (5.07" x 2.02" x 1.37"), Pin dimensions: Length: 10mm, diameter 6.5mm
• Warranty: Lifetime return-to-base
• Compliance: RoHS, WEEE, CE/EMC, FCC, IEC, RCM-POC, RCM-SDOC, REACH
• Dimensions: 800 x 90 x 62 mm / 31.5" x 3.5" x 2.4" (width x depth x height)
• Weight: 2.1 kg / 4.6 lbs