RA Technology RA14122A / RA-Studfix-V2-LL Extra Large Display Wall to Floor Mount in White

RA Technology RA14122A / RA-Studfix-V2-LL Wall to Floor Mount in White for Screen Sizes 55” to 98” or up to 65 Kg in weight

RA Technology RA14122A / RA-Studfix-V2-LL Wall to Floor Mount suitable for Flat Screens with a maximum recommended weight of 80kg and maximum VESA mount configuration of 600x400. For heavier screens with a larger VESA size, please see RA Technology's RA-Studfix-V2-LL System. A complete installation solution designed to enable Flat Screens or Touch Screens to be fixed to a wooden stud partition wall or solid wall and direct the weight of the screen directly to the floor. Ideal for installations when the wall itself cannot support the weight of a heavy screen.

Suitable for Smart, Clevertouch, Ctouch, Promethean ATP, Philips, Samsung, LG, Panasonic, BENQ, iTouch, Vividtouch, Hitachi, Iiyama, iBoard, Genee Screens and many more. The system includes two upright supporting box section legs which are fixed to the existing upright wooden studs inside the wall with a Wall Mounting Plate and Floor Plate included in the kit. This creates a rigid, safe and strong fixed mounting frame for the Flat Screen Mount (included) to fix onto and position the screen at a selection of height settings. All fixings, bolts, coach screws and plastic caps are included for a very neat and tidy installation.

The two Upright Supporting Legs are hollow box section design and allow all connection cables to and from the screen to be routed through them. Cable exit / entry slots are positioned on the inner sides of each leg to enable surface mounted cable trunking to route cables away to a connection panel if required (not included). The Maximum CENTRE POINT of screen from floor level is approximately 1500mm and the Minimum CENTRE POINT of screen from floor level is approximately 1025mm.

The Wall Mounting Plate can be fixed to the wall in a LOWER or HIGHER position to avoid any dado rails or network trunking on the walls surface. In the LOWEST position the centre of the wall plate will be 910mm from floor level and in the HIGHEST position the wall plate will be 1250mm from floor level. The Wall Mounting Plate itself is 130mm high and has a series of mounting slots which are 400mm and 600mm apart. Upright supporting legs are 500mm apart (centre to centre). The maximum void between the wall surface and the rear of the upright legs is 65mm. Full installation instructions included with each kit. Finished in durable White powder coat finish.

Key Features of RA Technology RA14122A / RA-Studfix-V2-LL Wall to Floor Mount

• Typical Screen Sizes: 55” - 98”
• Display Weight Capacity: 80 Kg
• Solution Type: Universal
• Orientation: Landscape
• VESA Mount Configuration: Maximum size of 600x400, Minimum Size of 200 x 200
• Installation Compatibility: Suitable for wooden stud partition walls or solid walls
• Weight Distribution: Directs the weight of the screen directly to the floor
• Ideal for Heavy Screens: Perfect when the wall alone cannot support the screen's weight
• Complete Kit Included: Contains two upright supporting box section legs, Wall Mounting Plate, and Floor Plate
• Secure and Strong Frame: Creates a rigid and strong fixed mounting frame for safe installation
• Height Adjustable: Allows screen positioning at various height settings (centre point between 1025mm and 1500mm from floor level)
• Neat Cable Management: Hollow box section legs with internal cable routing and cable exit/entry slots
• Flexible Wall Mounting Plate: Adjustable to avoid dado rails or network trunking (lowest position 910mm, highest position 1250mm from floor level)
• Compact Design: Wall Mounting Plate is 130mm high with four mounting slots 400mm and 600mm apart; upright legs are 500mm apart (centre to centre) with a maximum void of 65mm
• Durable Finish: White powder coat finish for longevity
• Complete Installation Solution: Includes all necessary fixings, bolts, coach screws, plastic caps, and full installation instructions for a tidy setup
• Warranty: 3 Year UK Return-to-Base Warranty