Vision TC-MATRIXTX AV Extender Transmitter with 120m Range

Manufacturer / Order Code : TC-MATRIXTX
EAN / GTIN : 4631209000001

Vision TC-MATRIXTX AV Extender Transmitter with 120m Range

More Views

In Stock
Next Day Delivery Available.

Price
£209.90Ex. VAT £251.88Inc. VAT
209 loyalty points

Public Sector Pricing Available
Login or Register to get lower prices.
Pay by purchase order, no card required.

Schools, pay by purchase order

Price Checked

All Prices & DestinationsMainland UK Delivery from: £7.90 Ex. VAT £9.48 Inc. VAT.


Vision TC-MATRIXTX AV Extender Transmitter with 120m Range, 4Kx2K Resolution and Crestron and AMX drivers

The TC-MATRIXTX is designed for video transmission applications the Techconnect Matrix allows distribution of HDMI content over an existing LAN infrastructure. You simply need a transmitter for each source, and a receiver for each display.

Switch / Distribute / Matrix

This product uses an IP network to distribute, switch, or matrix. It can have up to 100 x transmitters, and 100 x receivers.

Managed Switch

A “layer-3” switch is required with IGMP snooping turned on to allow multicasting. You don’t need to know what this means, but it is essential it is turned on.

Shared Subnet

All end points must be on the same sub-net.

4Kx2K

With a maximum transfer rate of 18 Gbps and using H.264 compression this system supports 4K.

Point-to-Point

You can connect a transmitter directly to a receiver with a CAT6 cable and use it as a simple extender. Maximum cable length up to 120 m (394 ft).

Scaleable

Whether you need a small system or a large system; just buy what you need. When your system needs to grow just add more end points. Transmitters and receivers are sold separately.

Easy Setup and Switching

Each transmitter and receiver should be set to a unique channel on the front panel. Adjust the “TX Connected” channel on each receiver to select the target transmitter. Use the buttons on the front panel or the included remote control to change channels.

Advanced Software

Setup software is included for Mac and PCs. It scans for devices and allows the integrator to set device name, channel and IP address.

Video Wall Presets

Supports up to 3×3 video walls. Enter video wall mode and choose from 3×3, 3×2, 3×1, 2×2, 2×3, 1×3. Fine tune with bezel adjustment.

IR Passback

The system supports IR passback so source devices can be controlled remotely. IR emitter and receiver cables are included with each device. Note: sends IR commands from Tx-Rx or Rx-Tx as required.

Crestron and AMX drivers

Designing a system controlled by a Crestron or AMX control system is easy.

Hot Swap

If a device needs swapping simply replace it and set the channel on the new device to match the old device. IP and Mac addresses don’t need to be modified.

Key Features of Vision TC-MATRIXTX AV Extender Transmitter

  • Connectivity: 1 X HDMI (type A), 1 X Ethernet (RJ45), 1 X DC Power (2-port Phoenix), 1 X 3.5mm Minijack (IR)
  • CAT6 Maximum Distance (if Connected Peer-to-peer Directly): 120 Metres (394 Ft)
  • Maximum Video Format Supported: 4K
  • Output Video: HDMI 2.0 with HDCP 2.2
  • Output Audio: PCM
  • Compression: H.264
  • Video Latency: < 500 Ms
  • Switch Time: Approx 5 Seconds (caused By HDCP Handshake)
  • Input And Output TMDS Signal: 0.7-1.5 Volts P-p
  • Input And Output DDC Signal: 5 Volts P-p (ttl)
  • Input And Output HDMI Cable Length: 5m (16.4 Ft) Awg 26
  • Operating Temperature Range: 0-50°c
  • Storage Temperature Range: -10-70°c
  • Operating Humidity Range: 0 To 90 % No Condensation
  • Tx Power Consumption: 7 Watts
  • Rx Power Consumption: 10 Watts
  • IR Passback Bandwidth: 20-60 Khz
  • ESD Protection: 1a Contact Discharge Level 3 / 1b Air Discharge Level 3 (standard: Iec61000-4-2)
  • Power Supply: 100-240v 50/60hz Ac 5 Volt / 3 Amp
  • Construction Material: Metal
  • Colour: Black
  • Transformer: Integrated Into Plug
  • Includes Interchangeable Plugs: UK/EU/US/AU
  • DC Tail Length: 1.8m
  • Accessories Included: 2 X Mounting Ears, 1 X Remote Control, 1 X IR Emitter Cable and 1 X IR Receiver Cable
  • Product Dimensions: 164 X 108.5 X 23.6 mm
  • Transformer Dimensions: 81 X 52 X 38 mm
  • Packaged Dimensions: 357 X 153.5 X 85 mm
  • Product Weight: 330g
  • Packaged Weight: 0.8kg
  • Warranty: Lifetime Return-to-base
  • Compliances: RoHS, WEEE, CE/EMC
  • Country Of Origin: China

Please Note: All images & product information, specification, details, and, if applicable, dimensions, are supplied by the manufacturer, and are for illustration / reference purposes only. In the event of any discrepancy of the information portrayed on this page, the package contents will prevail.