Vision Techconnect TC3-AMP Digital Stereo Amplifier and CS-1900 30w 2-Way Ceiling Loudspeakers Bundle

Features of Vision AV-1800 2 x 25w Digital Amplifier

Front Panel Input

Two Inputs are wired into the rear with removable phoenix connectors, but Input 1 is also duplicated on the front panel with a minijack socket for convenience. This “half-normalled” input disconnects the rear terminal while in use.

D-Class Amplifier

Digital amplifiers use no power unless they are amplifying program, so even on at full volume; unless it is receiving input it is effectively off. Digital amplifiers also have the advantage of running cold so a bulky heatsink is not necessary

Power Four Speakers

Don’t let size deceive you: the Techconnect Amp can drive into a 4 ohm load allowing you to power up to four 8 ohm speakers (or two 4 ohm speakers).

Preset Memory

By default when power is activated the Techconnect Amp turns on and resumes the most recent settings. For hospitality applications it can be set to return to a preset input and level whenever it is powered on – for example in hotel guest rooms.

Tactile Dial

A simple clear control interface makes the product easy to use long press on the dial to power on and off. Short press to change input.

Remote Control

A remote control is included and IR receivers are positioned on the front and rear for integration with a control system such as the Techconnect Control. Note: there is no tone control with this amplifier. Vision’s spare remote controls have tone buttons but they do not work with this product.

Easy to Install and Uninstall

A robust module that is easy to install or remove and disconnect from the front. Removable phoenix connectors allow non-technical end users to uninstall it very easily if required.

Cables Included

Speaker cable is included plus short input cables are included for connection to the rear of adjacent input modules on the Techconnect.

Secure

Ideal when you don’t have furniture to sit an amplifier on, and because it is mounted to the wall it is much less obvious as a target for theft.

Close at Hand

Can be positioned anywhere in the room making it perfect for training rooms, boardrooms, and classrooms.

Integrated Techconnect Family

Included is a single-gang backbox and surround, or alternatively you can mount it in a double-gang surround with other Techconnect modules.

Features of Vision CS-1900 Pair Ceiling Loudspeakers

Front EQ

The simple attenuation switch on the front allows the user to fine-tune the EQ for the environment.

Titanium Dome

The large tweeter is made from premium material and pivots to help installers setup the soundscape. Titanium ensures long, stable performance and reduces distortion.

Woven Kevlar

Kevlar gives smooth audio with incredible detail and transparency. The cone is held in place with a butyl rubber surround to extend the life of the loudspeaker.

Magnetic Grill

The grill clips into place magnetically once the speakers are secured.

Invisible

The grill extends all the way to the edge of the speaker resulting in virtually no visible edge. This ultra thin grille allows the technology to visually disappear.

Simple to fit

A cutout template is included so the installer can easily trace the cut line in the ceiling tile. Cut a 210 mm (8.3") hole and turn the dog-leg screws from below to fix the speaker; it’s quick and easy.

Shallow

Only 87 mm (3.4") deep, the CS-1900 can be placed anywhere around the room to optimally disperse the sound. They fit in any environment which has a false ceiling.

Crossover

Gold plated terminals and a quality crossover circuit is included which splits the work between the woofer and tweeter.

High Sensitivity

Ceiling speakers often lack the power of wall speakers, but these have a higher sensitivity of 90dB to cut through high-noise presentation environments.

Thick Ceiling?

The clamps are an extra long 35 mm (1.4") to cope with ceilings made of very thick material. Most ceiling speakers can only cope with tiles up to 15 mm (0.6") thick.

Key Features of Vision TC3-AMP 2x 25w Amplifier

• Power: 2 X 25W @ 8 OHMS
• Total Harmonic Distortion: less than or equal to 1% (20Hz~22kHz)
• Frequency Response: (LINE IN) 80Hz~22kHz(±2dB)
• Signal to Noise Ratio: (LINE IN) more than or equal to 98dB (A-weighted)
• Rating Input Level/Impedance: Line in 500mV/50k Ω
• Power Consumption (Rating Condition): less than or equal to 50W
• Accessories Included: 1 x Single-gang Backbox, 1 x Single-gang Surround, 2 x 150mm (5.9") input cables, 2 x Unshielded Speaker cable 5m (16.4 ft) long, and 1 x Remote Control with batteries
• Power Supply: 100-240v 50/60Hz AC External Power Supply – 15 volt / 4 amp.
• Warranty: Lifetime return-to-base
• Compliances: RoHS, WEEE, CE/EMC, C-TICK, FCC, IC
• Amplifier Module Dimensions: 42 x 64 x 36mm / 1.65" x 2.8" x 1.57"
• Backbox Dimensions: 86 x 86 x 45mm / 3.39" x 3.39" x 1.77"
• Surround Dimensions: 86 x 86 x 8mm / 3.39" x 3.39" x 0.31"

Key Features of Vision CS-1900 Pair of 30w 2-Way Ceiling Loudspeakers

• LoudSpeaker Dimensions :227 x 87 mm/ 9.0" x 3.6"
• Cutout Size: 210 mm / 8.3"
• Weight: 1.52 kg / 3.4 lbs (each)
• Power Handling: 60 Watt RMS
• Woofer: 6.5" Woven Kevlar
• Tweeter: 0.75" Titanium Dome
• Construction Material: ABS Plastic
• Speaker Terminals: Spring post
• Nominal Impedance: 8 ohms
• Sensitivity: 90 dB (1w/1m)
• Frequency Response: 60Hz-20kHz
• Warranty: Lifetime return-to-base
• Compliances: RoHS, WEEE, REACH