Vision Techconnect TC3 HDMI, VGA, USB Installation Kit with 10M Cables

Vision Techconnect Interactive Touchscreen TC3 Faceplate System Digital Install Kit with HDMI 1.4 (4k Capable), VGA, 3.5mm Audio and USB-B Modules and 10 Metre Cables for use with LED and LCD Interactive Display panels

We highly recommend for optimum performance on touch, using a Active USB cable and Booster Module for cabling distances over 5 metres

Techconnect is a modular audio-visual faceplate family engineered especially for AV installers. A “surround” which comes in two parts fits to a backbox (or “mudring” if your wall is hollow), then the modules fix in place to complete the installation.

Package Contents

• Double-Gang Backbox
• Double-Gang Surround
• 1 x 1.4 HDMI socket (4k Capable) Module
• 1 x VGA with 3.5mm socket (for PC video & audio) Module
• 1 x USB-B Socket (on front) Module
• 10 Metre HDMI Techconnect Cable
• 10 Metre VGA with 3.5mm Jack Techconnect Cable
• 2 x blanking modules

Improved Fit and Finish

In Techconnect3 every element of Techconnect has been reconsidered and improved. From more space behind the modules stash cables, to narrower and more even gaps between modules.

Modern Matt White

Pure white with a chiselled profile, Techconnect3 also has 11 mm of flat space above and below the connectors for information or company branding stickers.

Stronger

Techconnect3 has shorter modules and extra ribbing to reduce module flex. On parts where flex is desirable to avoid shattering ABS plastic is used.

Screw-In Modules

The modules have a tab that hooks into the surround at the bottom, then a couple of turns of the pre-installed screw lock the module into place.

Packages

All modules, mounting hardware, and cables are sold individually or in simple packages which can be used as a starting point.

Techconnect Cables

Vision offer professional pre-prepared cables for use with the Techconnect system. All Vision products including cables carry a 3-year warranty.

Quality

A major cost component of cables is copper. Techconnect cable balances cost and quality providing conductors which carry sufficient current to support high resolution signals, and the shielding is evenly wound to avoid jitter and flagging. Ferrite Cores on VGA, USB, and HDMI cables eliminate RF induction noise.

Plug-In

VGA and Minijack Techconnect cables have phoenix connectors on one end which plugs right in to the rear of the modules. These phoenix connectors can easily be removed to pull cables.

EDID Support

Vision’s VGA cable included the SDA and SCL data lines to support EDID handshakes which allows the display device to communicate its supported display modes

No Soldering

Faceplates that require soldering take time to build onsite, and – even for experts – create a possible point of failure in the system. Techconnect de-risks an installation.

Key Features of Techconnect V3 Kit

• Future-proof clip-in modular faceplate
• Plug-in cables don’t require soldering
• Wide range of spare modules and cables available
• Packages contain basic selection of modules required for typical AV installation
• Enclosure Colour: White
• Warranty: 3 years onsite only warranty